# 7.2. Gradient Descent and Stochastic Gradient Descent¶

In this section, we are going to introduce the basic principles of gradient descent. Although it is not common for gradient descent to be used directly in deep learning, an understanding of gradients and the reason why the value of an objective function might decline when updating the independent variable along the opposite direction of the gradient is the foundation for future studies on optimization algorithms. Next, we are going to introduce stochastic gradient descent (SGD).

## 7.2.1. Gradient Descent in One-Dimensional Space¶

Here, we will use a simple gradient descent in one-dimensional space as an example to explain why the gradient descent algorithm may reduce the value of the objective function. We assume that the input and output of the continuously differentiable function \(f: \mathbb{R} \rightarrow \mathbb{R}\) are both scalars. Given \(\epsilon\) with a small enough absolute value, according to the Taylor’s expansion formula from the “Mathematical basics” section, we get the following approximation:

Here, \(f'(x)\) is the gradient of function \(f\) at \(x\). The gradient of a one-dimensional function is a scalar, also known as a derivative.

Next, find a constant \(\eta>0\), to make \(\left|\eta f'(x)\right|\) sufficiently small so that we can replace \(\epsilon\) with \(-\eta f'(x)\) and get

If the derivative \(f'(x) \neq 0\), then \(\eta f'(x)^2>0\), so

This means that, if we use

to iterate \(x\), the value of function \(f(x)\) might decline. Therefore, in the gradient descent, we first choose an initial value \(x\) and a constant \(\eta > 0\) and then use them to continuously iterate \(x\) until the stop condition is reached, for example, when the value of \(f'(x)^2\) is small enough or the number of iterations has reached a certain value.

Now we will use the objective function \(f(x)=x^2\) as an example to see how gradient descent is implemented. Although we know that \(x=0\) is the solution to minimize \(f(x)\), here we still use this simple function to observe how \(x\) is iterated. First, import the packages or modules required for the experiment in this section.

```
In [1]:
```

```
%matplotlib inline
import gluonbook as gb
import math
from mxnet import nd
import numpy as np
```

Next, we use \(x=10\) as the initial value and assume \(\eta=0.2\). Using gradient descent to iterate \(x\) 10 times, we can see that, eventually, the value of \(x\) approaches the optimal solution.

```
In [2]:
```

```
def gd(eta):
x = 10
results = [x]
for i in range(10):
x -= eta * 2 * x # f(x) = x* the derivative of x is f'(x) = 2* x.
results.append(x)
print('epoch 10, x:', x)
return results
res = gd(0.2)
```

```
epoch 10, x: 0.06046617599999997
```

The iterative trajectory of the independent variable \(x\) is plotted as follows.

```
In [3]:
```

```
def show_trace(res):
n = max(abs(min(res)), abs(max(res)), 10)
f_line = np.arange(-n, n, 0.1)
gb.set_figsize()
gb.plt.plot(f_line, [x * x for x in f_line])
gb.plt.plot(res, [x * x for x in res], '-o')
gb.plt.xlabel('x')
gb.plt.ylabel('f(x)')
show_trace(res)
```

## 7.2.2. Learning Rate¶

The positive \(\eta\) in the above gradient descent algorithm is usually called the learning rate. This is a hyper-parameter and needs to be set manually. If we use a learning rate that is too small, it will cause \(x\) to update at a very slow speed, requiring more iterations to get a better solution. Here, we have the iterative trajectory of the independent variable \(x\) with the learning rate \(\eta=0.05\). As we can see, after iterating 10 times when the learning rate is too small, there is still a large deviation between the final value of \(x\) and the optimal solution.

```
In [4]:
```

```
show_trace(gd(0.05))
```

```
epoch 10, x: 3.4867844009999995
```

If we use an excessively high learning rate, \(\left|\eta f'(x)\right|\) might be too large for the first-order Taylor expansion formula mentioned above to hold. In this case, we cannot guarantee that the iteration of \(x\) will be able to lower the value of \(f(x)\). For example, when we set the learning rate to \(\eta=1.1\), \(x\) overshoots the optimal solution \(x=0\) and gradually diverges.

```
In [5]:
```

```
show_trace(gd(1.1))
```

```
epoch 10, x: 61.917364224000096
```

## 7.2.3. Gradient Descent in Multi-Dimensional Space¶

Now that we understand gradient descent in one-dimensional space, let us consider a more general case: the input of the objective function is a vector and the output is a scalar. We assume that the input of the target function \(f: \mathbb{R}^d \rightarrow \mathbb{R}\) is the \(d\)-dimensional vector \(\boldsymbol{x} = [x_1, x_2, \ldots, x_d]^\top\). The gradient of the objective function \(f(\boldsymbol{x})\) with respect to \(\boldsymbol{x}\) is a vector consisting of \(d\) partial derivatives:

For brevity, we use \(\nabla f(\boldsymbol{x})\) instead of \(\nabla_{\boldsymbol{x}} f(\boldsymbol{x})\). Each partial derivative element \(\partial f(\boldsymbol{x})/\partial x_i\) in the gradient indicates the rate of change of \(f\) at \(\boldsymbol{x}\) with respect to the input \(x_i\). To measure the rate of change of \(f\) in the direction of the unit vector \(\boldsymbol{u}\) (\(\|\boldsymbol{u}\|=1\)), in multivariate calculus, the directional derivative of \(f\) at \(\boldsymbol{x}\) in the direction of \(\boldsymbol{u}\) is defined as

According to the property of directional derivatives [1，Chapter 14.6 Theorem 3], the aforementioned directional derivative can be rewritten as

The directional derivative \(\text{D}_{\boldsymbol{u}} f(\boldsymbol{x})\) gives all the possible rates of change for \(f\) along \(\boldsymbol{x}\). In order to minimize \(f\), we hope to find the direction the will allow us to reduce \(f\) in the fastest way. Therefore, we can use the unit vector \(\boldsymbol{u}\) to minimize the directional derivative \(\text{D}_{\boldsymbol{u}} f(\boldsymbol{x})\).

For \(\text{D}_{\boldsymbol{u}} f(\boldsymbol{x}) = \|\nabla f(\boldsymbol{x})\| \cdot \|\boldsymbol{u}\| \cdot \text{cos} (\theta) = \|\nabla f(\boldsymbol{x})\| \cdot \text{cos} (\theta)\), Here, \(\theta\) is the angle between the gradient \(\nabla f(\boldsymbol{x})\) and the unit vector \(\boldsymbol{u}\). When \(\theta = \pi\), \(\text{cos }(\theta)\) gives us the minimum value \(-1\). So when \(\boldsymbol{u}\) is in a direction that is opposite to the gradient direction \(\nabla f(\boldsymbol{x})\), the direction derivative \(\text{D}_{\boldsymbol{u}} f(\boldsymbol{x})\) is minimized. Therefore, we may continue to reduce the value of objective function \(f\) by the gradient descent algorithm:

\(\boldsymbol{x} \leftarrow \boldsymbol{x} - \eta \nabla f(\boldsymbol{x}).\)

Similarly, \(\eta\) (positive) is called the learning rate.

Now we are going to construct an objective function \(f(\boldsymbol{x})=x_1^2+2x_2^2\) with a two-dimensional vector \(\boldsymbol{x} = [x_1, x_2]^\top\) as input and a scalar as the output. So we have the gradient \(\nabla f(\boldsymbol{x}) = [2x_1, 4x_2]^\top\). We will observe the iterative trajectory of independent variable \(\boldsymbol{x}\) by gradient descent from the initial position \([5,2]\). First, we are going to define two helper functions. The first helper uses the given independent variable update function to iterate independent variable \(\boldsymbol{x}\) a total of 20 times from the initial position \([5,2]\). The second helper will visualize the iterative trajectory of independent variable \(\boldsymbol{x}\).

```
In [6]:
```

```
def train_2d(trainer): # This function is saved in the gluonbook package for future use.
x1, x2, s1, s2 = -5, -2, 0, 0 # s1 and s2 are states of the independent variable and will be used later in the chapter.
results = [(x1, x2)]
for i in range(20):
x1, x2, s1, s2 = trainer(x1, x2, s1, s2)
results.append((x1, x2))
print('epoch %d, x1 %f, x2 %f' % (i + 1, x1, x2))
return results
def show_trace_2d(f, results): # This function is saved in the gluonbook package for future use.
gb.plt.plot(*zip(*results), '-o', color='#ff7f0e')
x1, x2 = np.meshgrid(np.arange(-5.5, 1.0, 0.1), np.arange(-3.0, 1.0, 0.1))
gb.plt.contour(x1, x2, f(x1, x2), colors='#1f77b4')
gb.plt.xlabel('x1')
gb.plt.ylabel('x2')
```

Next, we observe the iterative trajectory of the independent variable at learning rate \(0.1\). After iterating the independent variable \(\boldsymbol{x}\) 20 times using gradient descent, we can see that. eventually, the value of \(\boldsymbol{x}\) approaches the optimal solution \([0, 0]\).

```
In [7]:
```

```
eta = 0.1
def f_2d(x1, x2): # Objective function.
return x1 ** 2 + 2 * x2 ** 2
def gd_2d(x1, x2, s1, s2):
return (x1 - eta * 2 * x1, x2 - eta * 4 * x2, 0, 0)
show_trace_2d(f_2d, train_2d(gd_2d))
```

```
epoch 20, x1 -0.057646, x2 -0.000073
```

## 7.2.4. Stochastic Gradient Descent (SGD)¶

In deep learning, the objective function is usually the average of the loss functions for each example in the training data set. We assume that \(f_i(\boldsymbol{x})\) is the loss function of the training data instance with \(n\) examples, an index of \(i\), and parameter vector of \(\boldsymbol{x}\), then we have the objective function

The gradient of the objective function at \(\boldsymbol{x}\) is computed as

If gradient descent is used, the computing cost for each independent variable iteration is \(\mathcal{O}(n)\), which grows linearly with \(n\). Therefore, when the model training data instance is large, the cost of gradient descent for each iteration will be very high.

Stochastic gradient descent (SGD) reduces computational cost at each iteration. At each iteration of stochastic gradient descent, we uniformly sample an index \(i\in\{1,\ldots,n\}\) for data instances at random, and compute the gradient \(\nabla f_i(\boldsymbol{x})\) to update \(\boldsymbol{x}\):

Here, \(\eta\) is the learning rate. We can see that the computing cost for each iteration drops from \(\mathcal{O}(n)\) of the gradient descent to the constant \(\mathcal{O}(1)\). We should mention that the stochastic gradient \(\nabla f_i(\boldsymbol{x})\) is the unbiased estimate of gradient \(\nabla f(\boldsymbol{x})\).

This means that, on average, the stochastic gradient is a good estimate of the gradient.

Now, we will compare it to gradient descent by adding random noise with a mean of 0 to the gradient to simulate ab SGD.

```
In [8]:
```

```
def sgd_2d(x1, x2, s1, s2):
return (x1 - eta * (2 * x1 + np.random.normal(0.1)),
x2 - eta * (4 * x2 + np.random.normal(0.1)), 0, 0)
show_trace_2d(f_2d, train_2d(sgd_2d))
```

```
epoch 20, x1 0.022879, x2 -0.138643
```

As we can see, the iterative trajectory of the independent variable in the SGD is more tortuous than in the gradient descent. This is due to the noise added in the experiment, which reduced the accuracy of the simulated stochastic gradient. In practice, such noise usually comes from individual examples in the training data set.

## 7.2.5. Summary¶

- If we use a more suitable learning rate and update the independent variable in the opposite direction of the gradient, the value of the objective function might be reduced. Gradient descent repeats this update process until a solution that meets the requirements is obtained.
- Problems occur when the learning rate is tool small or too large. A suitable learning rate is usually found only after multiple experiments.
- When there are more examples in the training data set, it costs more to compute each iteration for gradient descent, so SGD is preferred in these cases.

## 7.2.6. Problems¶

- Using a different objective function, observe the iterative trajectory of the independent variable in gradient descent and the SGD.
- In the experiment for gradient descent in two-dimensional space, try to use different learning rates to observe and analyze the experimental phenomena.