# 13.13. Image Classification (CIFAR-10) on Kaggle¶ Open the notebook in Colab

So far, we have been using Gluon’s data package to directly obtain image datasets in the ndarray format. In practice, however, image datasets often exist in the format of image files. In this section, we will start with the original image files and organize, read, and convert the files to the ndarray format step by step.

We performed an experiment on the CIFAR-10 dataset in Section 13.1. This is an important data set in the computer vision field. Now, we will apply the knowledge we learned in the previous sections in order to participate in the Kaggle competition, which addresses CIFAR-10 image classification problems. The competition’s web address is

Fig. 13.13.1 shows the information on the competition’s webpage. In order to submit the results, please register an account on the Kaggle website first.

Fig. 13.13.1 CIFAR-10 image classification competition webpage information. The dataset for the competition can be accessed by clicking the “Data” tab.

First, import the packages or modules required for the competition.

import collections
import d2l
import math
from mxnet import autograd, gluon, init, npx
from mxnet.gluon import nn
import os
import pandas as pd
import shutil
import time

npx.set_np()


## 13.13.1. Obtaining and Organizing the Dataset¶

The competition data is divided into a training set and testing set. The training set contains $$50,000$$ images. The testing set contains $$300,000$$ images, of which $$10,000$$ images are used for scoring, while the other $$290,000$$ non-scoring images are included to prevent the manual labeling of the testing set and the submission of labeling results. The image formats in both datasets are PNG, with heights and widths of 32 pixels and three color channels (RGB). The images cover $$10$$ categories: planes, cars, birds, cats, deer, dogs, frogs, horses, boats, and trucks. The upper-left corner of Figure 9.16 shows some images of planes, cars, and birds in the dataset.

After logging in to Kaggle, we can click on the “Data” tab on the CIFAR-10 image classification competition webpage shown in Fig. 13.13.1 and download the dataset by clicking the “Download All” button. After unzipping the downloaded file in ../data, and unzipping train.7z and test.7z inside it, you will find the entire dataset in the following paths:

• ../data/cifar-10/train/[1-50000].png

• ../data/cifar-10/test/[1-300000].png

• ../data/cifar-10/trainLabels.csv

• ../data/cifar-10/sampleSubmission.csv

Here folders train and test contain the training and testing images respectively, trainLabels.csv has labels for the training images, and sample_submission.csv is a sample of submission.

To make it easier to get started, we provide a small-scale sample of the dataset: it contains the first $$1000$$ training images and $$5$$ random testing images. To use the full dataset of the Kaggle competition, you need to set the following demo variable to False.

# Saved in the d2l package for later use
d2l.DATA_HUB['cifar10_tiny'] = (d2l.DATA_URL + 'kaggle_cifar10_tiny.zip',

# If you use the full dataset downloaded for the Kaggle competition, set the
# demo variable to False
demo = True

if demo:
else:
data_dir = '../data/cifar-10/'

Downloading ../data/kaggle_cifar10_tiny.zip from http://d2l-data.s3-accelerate.amazonaws.com/kaggle_cifar10_tiny.zip...


### 13.13.1.2. Organizing the Dataset¶

We need to organize datasets to facilitate model training and testing. Let us first read the labels from the csv file. The following function returns a dictionary that maps the filename without extension to its label.

# Saved in the d2l package for later use
"""Read fname to return a name to label dictionary."""
with open(fname, 'r') as f:
# Skip the file header line (column name)
tokens = [l.rstrip().split(',') for l in lines]
return dict(((name, label) for name, label in tokens))

print('# training examples:', len(labels))
print('# classes:', len(set(labels.values())))

# training examples: 1000
# classes: 10


Next, we define the reorg_train_valid function to segment the validation set from the original training set. The argument valid_ratio in this function is the ratio of the number of examples in the validation set to the number of examples in the original training set. In particular, let $$n$$ be the number of images of the class with the least examples, and $$r$$ be the ratio, then we will use $$\max(\lfloor nr\rfloor,1)$$ images for each class as the validation set. Let us use valid_ratio=0.1 as an example. Since the original training set has $$50,000$$ images, there will be $$45,000$$ images used for training and stored in the path “train_valid_test/train” when tuning hyper-parameters, while the other $$5,000$$ images will be stored as validation set in the path “train_valid_test/valid”. After organizing the data, images of the same class will be placed under the same folder so that we can read them later.

# Saved in the d2l package for later use
def copyfile(filename, target_dir):
"""Copy a file into a target directory."""
d2l.mkdir_if_not_exist(target_dir)
shutil.copy(filename, target_dir)

# Saved in the d2l package for later use
def reorg_train_valid(data_dir, labels, valid_ratio):
# The number of examples of the class with the least examples in the
# training dataset
n = collections.Counter(labels.values()).most_common()[-1][1]
# The number of examples per class for the validation set
n_valid_per_label = max(1, math.floor(n * valid_ratio))
label_count = {}
for train_file in os.listdir(os.path.join(data_dir, 'train')):
label = labels[train_file.split('.')[0]]
fname = os.path.join(data_dir, 'train', train_file)
# Copy to train_valid_test/train_valid with a subfolder per class
copyfile(fname, os.path.join(data_dir, 'train_valid_test',
'train_valid', label))
if label not in label_count or label_count[label] < n_valid_per_label:
# Copy to train_valid_test/valid
copyfile(fname, os.path.join(data_dir, 'train_valid_test',
'valid', label))
label_count[label] = label_count.get(label, 0) + 1
else:
# Copy to train_valid_test/train
copyfile(fname, os.path.join(data_dir, 'train_valid_test',
'train', label))
return n_valid_per_label


The reorg_test function below is used to organize the testing set to facilitate the reading during prediction.

# Saved in the d2l package for later use
def reorg_test(data_dir):
for test_file in os.listdir(os.path.join(data_dir, 'test')):
copyfile(os.path.join(data_dir, 'test', test_file),
os.path.join(data_dir, 'train_valid_test', 'test',
'unknown'))


Finally, we use a function to call the previously defined read_csv_labels, reorg_train_valid, and reorg_test functions.

def reorg_cifar10_data(data_dir, valid_ratio):
reorg_train_valid(data_dir, labels, valid_ratio)
reorg_test(data_dir)


We only set the batch size to $$1$$ for the demo dataset. During actual training and testing, the complete dataset of the Kaggle competition should be used and batch_size should be set to a larger integer, such as $$128$$. We use $$10\%$$ of the training examples as the validation set for tuning hyper-parameters.

batch_size = 1 if demo else 128
valid_ratio = 0.1
reorg_cifar10_data(data_dir, valid_ratio)


## 13.13.2. Image Augmentation¶

To cope with overfitting, we use image augmentation. For example, by adding transforms.RandomFlipLeftRight(), the images can be flipped at random. We can also perform normalization for the three RGB channels of color images using transforms.Normalize(). Below, we list some of these operations that you can choose to use or modify depending on requirements.

transform_train = gluon.data.vision.transforms.Compose([
# Magnify the image to a square of 40 pixels in both height and width
gluon.data.vision.transforms.Resize(40),
# Randomly crop a square image of 40 pixels in both height and width to
# produce a small square of 0.64 to 1 times the area of the original
# image, and then shrink it to a square of 32 pixels in both height and
# width
gluon.data.vision.transforms.RandomResizedCrop(32, scale=(0.64, 1.0),
ratio=(1.0, 1.0)),
gluon.data.vision.transforms.RandomFlipLeftRight(),
gluon.data.vision.transforms.ToTensor(),
# Normalize each channel of the image
gluon.data.vision.transforms.Normalize([0.4914, 0.4822, 0.4465],
[0.2023, 0.1994, 0.2010])])


In order to ensure the certainty of the output during testing, we only perform normalization on the image.

transform_test = gluon.data.vision.transforms.Compose([
gluon.data.vision.transforms.ToTensor(),
gluon.data.vision.transforms.Normalize([0.4914, 0.4822, 0.4465],
[0.2023, 0.1994, 0.2010])])


Next, we can create the ImageFolderDataset instance to read the organized dataset containing the original image files, where each example includes the image and label.

train_ds, valid_ds, train_valid_ds, test_ds = [
gluon.data.vision.ImageFolderDataset(
os.path.join(data_dir, 'train_valid_test', folder))
for folder in ['train', 'valid', 'train_valid', 'test']]


We specify the defined image augmentation operation in DataLoader. During training, we only use the validation set to evaluate the model, so we need to ensure the certainty of the output. During prediction, we will train the model on the combined training set and validation set to make full use of all labelled data.

train_iter, train_valid_iter = [gluon.data.DataLoader(
dataset.transform_first(transform_train), batch_size, shuffle=True,
last_batch='keep') for dataset in (train_ds, train_valid_ds)]

dataset.transform_first(transform_test), batch_size, shuffle=False,
last_batch='keep') for dataset in (valid_ds, test_ds)]


## 13.13.4. Defining the Model¶

Here, we build the residual blocks based on the HybridBlock class, which is slightly different than the implementation described in Section 7.6. This is done to improve execution efficiency.

class Residual(nn.HybridBlock):
def __init__(self, num_channels, use_1x1conv=False, strides=1, **kwargs):
super(Residual, self).__init__(**kwargs)
strides=strides)
if use_1x1conv:
self.conv3 = nn.Conv2D(num_channels, kernel_size=1,
strides=strides)
else:
self.conv3 = None
self.bn1 = nn.BatchNorm()
self.bn2 = nn.BatchNorm()

def hybrid_forward(self, F, X):
Y = F.npx.relu(self.bn1(self.conv1(X)))
Y = self.bn2(self.conv2(Y))
if self.conv3:
X = self.conv3(X)
return F.npx.relu(Y + X)


Next, we define the ResNet-18 model.

def resnet18(num_classes):
net = nn.HybridSequential()
nn.BatchNorm(), nn.Activation('relu'))

def resnet_block(num_channels, num_residuals, first_block=False):
blk = nn.HybridSequential()
for i in range(num_residuals):
if i == 0 and not first_block:
else:
return blk

resnet_block(128, 2),
resnet_block(256, 2),
resnet_block(512, 2))
return net


The CIFAR-10 image classification challenge uses 10 categories. We will perform Xavier random initialization on the model before training begins.

def get_net(ctx):
num_classes = 10
net = resnet18(num_classes)
net.initialize(ctx=ctx, init=init.Xavier())
return net

loss = gluon.loss.SoftmaxCrossEntropyLoss()


## 13.13.5. Defining the Training Functions¶

We will select the model and tune hyper-parameters according to the model’s performance on the validation set. Next, we define the model training function train. We record the training time of each epoch, which helps us compare the time costs of different models.

def train(net, train_iter, valid_iter, num_epochs, lr, wd, ctx, lr_period,
lr_decay):
trainer = gluon.Trainer(net.collect_params(), 'sgd',
{'learning_rate': lr, 'momentum': 0.9, 'wd': wd})
for epoch in range(num_epochs):
train_l_sum, train_acc_sum, n, start = 0.0, 0.0, 0, time.time()
if epoch > 0 and epoch % lr_period == 0:
trainer.set_learning_rate(trainer.learning_rate * lr_decay)
for X, y in train_iter:
y = y.astype('float32').as_in_ctx(ctx)
y_hat = net(X.as_in_ctx(ctx))
l = loss(y_hat, y).sum()
l.backward()
trainer.step(batch_size)
train_l_sum += float(l)
train_acc_sum += float((y_hat.argmax(axis=1) == y).sum())
n += y.size
time_s = "time %.2f sec" % (time.time() - start)
if valid_iter is not None:
valid_acc = d2l.evaluate_accuracy_gpu(net, valid_iter)
epoch_s = ("epoch %d, loss %f, train acc %f, valid acc %f, "
% (epoch + 1, train_l_sum / n, train_acc_sum / n,
valid_acc))
else:
epoch_s = ("epoch %d, loss %f, train acc %f, " %
(epoch + 1, train_l_sum / n, train_acc_sum / n))
print(epoch_s + time_s + ', lr ' + str(trainer.learning_rate))


## 13.13.6. Training and Validating the Model¶

Now, we can train and validate the model. The following hyper-parameters can be tuned. For example, we can increase the number of epochs. Because lr_period and lr_decay are set to 80 and 0.1 respectively, the learning rate of the optimization algorithm will be multiplied by 0.1 after every 80 epochs. For simplicity, we only train one epoch here.

ctx, num_epochs, lr, wd = d2l.try_gpu(), 1, 0.1, 5e-4
lr_period, lr_decay, net = 80, 0.1, get_net(ctx)
net.hybridize()
train(net, train_iter, valid_iter, num_epochs, lr, wd, ctx, lr_period,
lr_decay)

epoch 1, loss 3.033716, train acc 0.111957, valid acc 0.112500, time 9.09 sec, lr 0.1


## 13.13.7. Classifying the Testing Set and Submitting Results on Kaggle¶

After obtaining a satisfactory model design and hyper-parameters, we use all training datasets (including validation sets) to retrain the model and classify the testing set.

net, preds = get_net(ctx), []
net.hybridize()
train(net, train_valid_iter, None, num_epochs, lr, wd, ctx, lr_period,
lr_decay)

for X, _ in test_iter:
y_hat = net(X.as_in_ctx(ctx))
preds.extend(y_hat.argmax(axis=1).astype(int).asnumpy())
sorted_ids = list(range(1, len(test_ds) + 1))
sorted_ids.sort(key=lambda x: str(x))
df = pd.DataFrame({'id': sorted_ids, 'label': preds})
df['label'] = df['label'].apply(lambda x: train_valid_ds.synsets[x])
df.to_csv('submission.csv', index=False)

epoch 1, loss 2.915742, train acc 0.105000, time 9.57 sec, lr 0.1


After executing the above code, we will get a “submission.csv” file. The format of this file is consistent with the Kaggle competition requirements. The method for submitting results is similar to method in Section 4.10.

## 13.13.8. Summary¶

• We can create an ImageFolderDataset instance to read the dataset containing the original image files.

• We can use convolutional neural networks, image augmentation, and hybrid programming to take part in an image classification competition.

## 13.13.9. Exercises¶

1. Use the complete CIFAF-10 dataset for the Kaggle competition. Change the batch_size and number of epochs num_epochs to 128 and 100, respectively. See what accuracy and ranking you can achieve in this competition.

2. What accuracy can you achieve when not using image augmentation?

3. Scan the QR code to access the relevant discussions and exchange ideas about the methods used and the results obtained with the community. Can you come up with any better techniques?