{
"cells": [
{
"cell_type": "markdown",
"metadata": {},
"source": [
"# Padding and Stride\n",
"\n",
"In the previous example, our input had a height and width of 3 \n",
"and a convolution kernel with a height and width of 2, \n",
"yielding an output with a height and a width of 2. \n",
"In general, assuming the input shape is $n_h\\times n_w$ \n",
"and the convolution kernel window shape is $k_h\\times k_w$, \n",
"then the output shape will be\n",
"\n",
"$$(n_h-k_h+1) \\times (n_w-k_w+1).$$\n",
"\n",
"Therefore, the output shape of the convolutional layer \n",
"is determined by the shape of the input \n",
"and the shape of the convolution kernel window. \n",
"\n",
"In several cases we might want to incorporate particular techniquesâ€”padding and stridesâ€”regarding the size of the output:\n",
"\n",
"* In general, since kernels generally have width and height greater than 1,\n",
"that means that after applying many successive convolutions,\n",
"we will wind up with an output that is much smaller than our input. \n",
"If we start with a 240x240 pixel image, 10 layers of 5x5 convolutions \n",
"reduce the image to 200x200 pixels, slicing off 30% of the image and with it obliterating any interesting information on the boundaries of the original image. *Padding* handles this issue.\n",
"* In some cases, we want to reduce the resolution drastically if say we find our original input resolution to be unweildy. *Strides* can help in these instances.\n",
"\n",
"## Padding\n",
"\n",
"As described above, one tricky issue when applying convolutional layers\n",
"is that losing pixels on the permimeter of our image. \n",
"Since we typically use small kernels, \n",
"for any given convolution, \n",
"we might only lose a few pixels, \n",
"but this can add up as we apply \n",
"many successive convolutional layers. \n",
"One straightforward solution to this problem \n",
"is to add extra pixels of filler around the boundary of our input image, \n",
"thus increasing the effective size of the image \n",
"Typically, we set the values of the extra pixels to 0. \n",
"In the figure below, we pad a $3 \\times 5$ input,\n",
"increasing its size to $5 \\times 7$. \n",
"The corresponding output then increases to a $4 \\times 6$ matrix.\n",
"\n",
"![Two-dimensional cross-correlation with padding. The shaded portions are the input and kernel array elements used by the first output element: $0\\times0+0\\times1+0\\times2+0\\times3=0$. ](../img/conv_pad.svg)\n",
"\n",
"In general, if we add a total of $p_h$ rows of padding\n",
"(roughly half on top and half on bottom)\n",
"and a total of $p_w$ columns of padding \n",
"(roughly half on the left and half on the right), \n",
"the output shape will be\n",
"\n",
"$$(n_h-k_h+p_h+1)\\times(n_w-k_w+p_w+1),$$\n",
"\n",
"This means that the height and width of the output\n",
" will increase by $p_h$ and $p_w$ respectively.\n",
"\n",
"In many cases, we will want to set $p_h=k_h-1$ and $p_w=k_w-1$ \n",
"to give the input and output the same height and width. \n",
"This will make it easier to predict the output shape of each layer \n",
"when constructing the network. \n",
"Assuming that $k_h$ is odd here, \n",
"we will pad $p_h/2$ rows on both sides of the height. \n",
"If $k_h$ is even, one possibility is to \n",
"pad $\\lceil p_h/2\\rceil$ rows on the top of the input \n",
"and $\\lfloor p_h/2\\rfloor$ rows on the bottom. \n",
"We will pad both sides of the width in the same way.\n",
"\n",
"Convolutional neural networks commonly use convolutional kernels \n",
"with odd height and width values, such as 1, 3, 5, or 7.\n",
"Choosing odd kernel sizes has the benefit \n",
"that we can preserve the spatial dimensionality \n",
"while padding with the same number of rows on top and bottom,\n",
"and the same number of columns on left and right. \n",
"\n",
"Moreover, this practice of using odd kernels \n",
"and padding to precisely preserve dimensionality \n",
"offers a clerical benefit.\n",
"For any two-dimensional array `X`, \n",
"when the kernels size is odd \n",
"and the number of padding rows and columns \n",
"on all sides are the same,\n",
"producing an output with the have the same height and width as the input, \n",
"we know that the output `Y[i,j]` is calculated \n",
"by cross-correlation of the input and convolution kernel \n",
"with the window centered on `X[i,j]`.\n",
"\n",
"In the following example, we create a two-dimensional convolutional layer \n",
"with a height and width of 3 \n",
"and apply 1 pixel of padding on all sides.\n",
"Given an input with a height and width of 8,\n",
" we find that the height and width of the output is also 8."
]
},
{
"cell_type": "code",
"execution_count": 1,
"metadata": {
"attributes": {
"classes": [],
"id": "",
"n": "1"
}
},
"outputs": [
{
"data": {
"text/plain": [
"(8, 8)"
]
},
"execution_count": 1,
"metadata": {},
"output_type": "execute_result"
}
],
"source": [
"from mxnet import nd\n",
"from mxnet.gluon import nn\n",
"\n",
"# For convenience, we define a function to calculate the convolutional layer. \n",
"# This function initializes the convolutional layer weights and performs\n",
"# corresponding dimensionality elevations and reductions on the input and\n",
"# output\n",
"def comp_conv2d(conv2d, X):\n",
" conv2d.initialize()\n",
" # (1,1) indicates that the batch size and the number of channels\n",
" # (described in later chapters) are both 1\n",
" X = X.reshape((1, 1) + X.shape)\n",
" Y = conv2d(X)\n",
" # Exclude the first two dimensions that do not interest us: batch and\n",
" # channel\n",
" return Y.reshape(Y.shape[2:])\n",
"\n",
"# Note that here 1 row or column is padded on either side, so a total of 2\n",
"# rows or columns are added\n",
"conv2d = nn.Conv2D(1, kernel_size=3, padding=1)\n",
"X = nd.random.uniform(shape=(8, 8))\n",
"comp_conv2d(conv2d, X).shape"
]
},
{
"cell_type": "markdown",
"metadata": {},
"source": [
"When the height and width of the convolution kernel are different, \n",
"we can make the output and input have the same height and width by setting different padding numbers for height and width."
]
},
{
"cell_type": "code",
"execution_count": 2,
"metadata": {
"attributes": {
"classes": [],
"id": "",
"n": "2"
}
},
"outputs": [
{
"data": {
"text/plain": [
"(8, 8)"
]
},
"execution_count": 2,
"metadata": {},
"output_type": "execute_result"
}
],
"source": [
"# Here, we use a convolution kernel with a height of 5 and a width of 3. The\n",
"# padding numbers on both sides of the height and width are 2 and 1,\n",
"# respectively\n",
"conv2d = nn.Conv2D(1, kernel_size=(5, 3), padding=(2, 1))\n",
"comp_conv2d(conv2d, X).shape"
]
},
{
"cell_type": "markdown",
"metadata": {},
"source": [
"## Stride\n",
"\n",
"When computing the cross-correlation, \n",
"we start with the convolution window \n",
"at the top-left corner of the input array,\n",
"and then slide it over all locations both down and to the right. \n",
"In previous examples, we default to sliding one pixel at a time.\n",
"However, sometimes, either for computational efficiency\n",
"or because we wish to downsample, \n",
"we move our window more than one pixel at a time,\n",
"skipping the intermediate locations.\n",
"\n",
"\n",
"We refer to the number of rows and columns traversed per slide as the *stride*.\n",
"So far, we have used strides of 1, both for height and width. \n",
"Sometimes, we may want to use a larger stride. \n",
"The figure below shows a two-dimensional cross-correlation operation \n",
"with a stride of 3 vertically and 2 horizontally. \n",
"We can see that when the second element of the first column is output, \n",
"the convolution window slides down three rows. \n",
"The convolution window slides two columns to the right \n",
"when the second element of the first row is output. \n",
"When the convolution window slides two columns to the right on the input, there is no output because the input element cannot fill the window \n",
"(unless we add padding).\n",
"\n",
"![Cross-correlation with strides of 3 and 2 for height and width respectively. The shaded portions are the output element and the input and core array elements used in its computation: $0\\times0+0\\times1+1\\times2+2\\times3=8$, $0\\times0+6\\times1+0\\times2+0\\times3=6$. ](../img/conv_stride.svg)\n",
"\n",
"In general, when the stride for the height is $s_h$ \n",
"and the stride for the width is $s_w$,\n",
"the output shape is\n",
"\n",
"$$\\lfloor(n_h-k_h+p_h+s_h)/s_h\\rfloor \\times \\lfloor(n_w-k_w+p_w+s_w)/s_w\\rfloor.$$\n",
"\n",
"If we set $p_h=k_h-1$ and $p_w=k_w-1$, \n",
"then the output shape will be simplified to \n",
"$\\lfloor(n_h+s_h-1)/s_h\\rfloor \\times \\lfloor(n_w+s_w-1)/s_w\\rfloor$. \n",
"Going a step further, if the input height and width \n",
"are divisible by the strides on the height and width, \n",
"then the output shape will be $(n_h/s_h) \\times (n_w/s_w)$.\n",
"\n",
"Below, we set the strides on both the height and width to 2, \n",
"thus halving the input height and width."
]
},
{
"cell_type": "code",
"execution_count": 3,
"metadata": {},
"outputs": [
{
"data": {
"text/plain": [
"(4, 4)"
]
},
"execution_count": 3,
"metadata": {},
"output_type": "execute_result"
}
],
"source": [
"conv2d = nn.Conv2D(1, kernel_size=3, padding=1, strides=2)\n",
"comp_conv2d(conv2d, X).shape"
]
},
{
"cell_type": "markdown",
"metadata": {},
"source": [
"Next, we will look at a slightly more complicated example."
]
},
{
"cell_type": "code",
"execution_count": 4,
"metadata": {
"attributes": {
"classes": [],
"id": "",
"n": "3"
}
},
"outputs": [
{
"data": {
"text/plain": [
"(2, 2)"
]
},
"execution_count": 4,
"metadata": {},
"output_type": "execute_result"
}
],
"source": [
"conv2d = nn.Conv2D(1, kernel_size=(3, 5), padding=(0, 1), strides=(3, 4))\n",
"comp_conv2d(conv2d, X).shape"
]
},
{
"cell_type": "markdown",
"metadata": {},
"source": [
"For the sake of brevity, when the padding number \n",
"on both sides of the input height and width are $p_h$ and $p_w$ respectively, we call the padding $(p_h, p_w)$. \n",
"Specifically, when $p_h = p_w = p$, the padding is $p$. \n",
"When the strides on the height and width are $s_h$ and $s_w$, respectively, \n",
"we call the stride $(s_h, s_w)$. \n",
"Specifically, when $s_h = s_w = s$, the stride is $s$. \n",
"By default, the padding is 0 and the stride is 1. \n",
"In practice we rarely use inhomogeneous strides or padding, \n",
"i.e., we usually have $p_h = p_w$ and $s_h = s_w$.\n",
"\n",
"## Summary\n",
"\n",
"* Padding can increase the height and width of the output. This is often used to give the output the same height and width as the input.\n",
"* The stride can reduce the resolution of the output, for example reducing the height and width of the output to only $1/n$ of the height and width of the input ($n$ is an integer greater than 1).\n",
"* Padding and stride can be used to adjust the dimensionality of the data effectively.\n",
"\n",
"## Exercises\n",
"\n",
"1. For the last example in this section, use the shape calculation formula to calculate the output shape to see if it is consistent with the experimental results.\n",
"1. Try other padding and stride combinations on the experiments in this section.\n",
"1. For audio signals, what does a stride of $2$ correspond to?\n",
"1. What are the computational benefits of a stride larger than $1$.\n",
"\n",
"## Scan the QR Code to [Discuss](https://discuss.mxnet.io/t/2350)\n",
"\n",
"![](../img/qr_padding-and-strides.svg)"
]
}
],
"metadata": {
"language_info": {
"name": "python"
}
},
"nbformat": 4,
"nbformat_minor": 2
}